Spatial bandgap engineering along single alloy nanowires

Bandgap engineering of semiconductor nanowires is important in designing nanoscale multifunctional optoelectronic devices. Here, we report a facile thermal evaporation method, and realize the spatial bandgap engineering in single CdS(1-x)Se(x) alloy nanowires. Along the length of these achieved nanowires, the composition can be continuously tuned from x = 0 (CdS) at one end to x = 1 (CdSe) at the other end, resulting in the corresponding bandgap (light emission wavelength) being modulated gradually from 2.44 eV (507 nm, green light) to 1.74 eV (710 nm, red light). In spite of the existing composition (crystal lattice) transition along the length, these multicolor nanowires still possess high-quality crystallization. These bandgap engineered nanowires will have promising applications in such as multicolor display and lighting, high-efficiency solar cells, ultrabroadly spectral detectors, and biotechnology.     

Communication: vacuum ultraviolet laser photodissociation studies of small molecules by the vacuum ultraviolet laser photoionization time-sliced velocity-mapped ion imaging method

We demonstrate that the vacuum ultraviolet (VUV) photodissociation dynamics of N(2) and CO(2) can be studied using VUV photoionization with time-sliced velocity-mapped ion imaging (VUV-PI-VMI) detection. The VUV laser light is produced by resonant sum frequency mixing in Kr. N(2) is used to show that when the photon energy of the VUV laser is above the ionization energy of an allowed transition of one of the product atoms it can be detected and characterized as the wavelength is varied. In this case a β parameter = 0.57 for the N((2)D°) was measured after exciting N(2)(o(1)Π(u), v(') = 2, J(') = 2) ← N(2)(X(1)Σ(g) (+), v(") = 0, J(") = 1). Studies with CO(2) show that when there is no allowed transition, an autoionization resonance can be used for the detection of a product atom. In this case it is shown for the first time that the O((1)D) atom is produced with CO((1)Σ(+)) at 92.21 nm. These results indicate that the VUV laser photodissociation combined with the VUV-PI-VMI detection is a viable method for studying the one-photon photodissociation from the ground state of simple molecules in the extreme ultraviolet and VUV spectral regions.     

液相色谱-串联质谱法快速测定植物源性食品中的百草枯

建立了水果、蔬菜、豆类和粮谷中百草枯残留的高效液相色谱-串联质谱(HPLC-MS/MS)分析方法.用水提取样品中的百草枯,弱阳离子交换(WCX)固相萃取柱(SPE)净化.采用CAPCELL PAK ST色谱柱(150 mm×2.0mm).乙腈-10 mmol/L乙酸铵水溶液(用甲酸调至pH 4.0)为流动相,以电喷雾离...     

Synthesis, Crystal Structure, and Herbicidal Activities of 2-Cyanoacrylates Containing 1,3,4-Thiadiazole Moieties

Three series of novel 2‐cyanoacrylates 7a – 7f , 9a – 9f , 10a – 10f containing 1,3,4‐thiadiazole ring moieties were synthesized as herbicidal inhibitors of photosystem II (PS II) electron transportation. Their structures were clearly verified by ¹H NMR, ¹³C NMR, elemental analysis (or HRMS analysis) and single‐crystal X‐ray diffraction analysis. Bioassay showed that a suitable group at the 3‐position of acrylates was essential for high herbicidal activity. In particular, compound 7e showed the best herbicidal activities and gave 100% inhibitory activity against rape and amaranth pigweed at a dose of 1.5 kg/ha. Introduction of substituent with higher polarity such as sulfinyl or sulfonyl to the 5‐position of 1,3,4‐thiadiazole decreased herbicidal activities.     

Ti0.10Zr0.15V0.35Cr0.10Ni0.30+5wt% LaNi5复合储氢合金的电化学性能与协同效应

为了改善钛钒基固溶体合金的电化学性能,利用两步电弧熔炼法制备复合储氢合金Ti0.10Zr0.15V0.35Cr0.10Ni0.30+5wt%LaNi5,X-射线衍射(XRD)和场发射扫描电镜-能谱(FESEM-EDS)显示:复合储氢合金的主相是体心立方结构的钒基固溶体相和六方结构的C14 Laves相,复合过程中生成了第二相。电化学测试结果表明:复合合金电极的P-C-T特征、活化性能、最大放电容量、循环稳定性、低温放电性能和动力学特性均较母体合金有显著改善。复合合金电极的活化周期数为5,最大放电容量为353.9 mAh.g-1,233 K时低温放电能力为50.26%。该复合合金电极的最大储氢容量、平台压、电荷转移电阻和交换电流密度均存在协同效应;在任意循环、在高/低温下以及在高倍率放电过程中,该复合合金电极的放电容量均存在协同效应。     

Microwave-assisted synthesis of α-hydroxy aromatic ketones from α-bromo aromatic ketones in water

A reaction ofα-bromo aromatic ketones in water with microwave irradiation gave the correspondingα-hydroxy aromatic ketones in good yields.The use of microwaves was found to significantly improve yields and shorten the reaction time.This reaction afforded a very clean,convenient method for the synthesis ofα-hydroxy aromatic ketones.     

High performance liquid chromatography with immobilized Ru(bpy)_3~(2+)-KMnO_4 chemiluminescence detection and its application in metabolism of repaglinide in pig liver microsomes

A novel high performance liquid chromatography-chemiluminescence（HPLC-CL） method for investigation of in vitro metabolism of repaglinide in pig liver microsomes with microdialysis sampling technique was developed.The chromatographic separation was performed on a Hypersil BDS-C18 column with an isocratic mobile phase consisting of methanol and 0.01 mol/L KH₂PO₄（pH 3.0）（volume ratio 75:25） at a flow rate of 1.0 mL/min.The detection was based on the chemiluminescence reaction of repaglinide with acidic potassium permanganate（KMnO₄） and tris（2,2’-bipyridyl）ruthenium（Ⅲ）(Ru（bpy）₃³⁺),which was immobilized on the cationic ion-exchange resin for obtaining high sensitivity and reducing consumption of expensive reagent.     

柱前衍生化-高效液相色谱法分析木糖结晶母液的单糖组成

采用1-苯基-甲基-吡唑啉酮(PMP)柱前衍生化-反相高效液相色谱(HPLC)法建立了8种常见单糖的分离模式,并用于木糖结晶母液单糖组成的定量分析.结果表明:木糖结晶母液至少由甘露糖、鼠李糖、纤维二糖、葡萄糖、半乳糖、木糖、阿拉伯糖及岩藻糖8种单糖组成,其中以葡萄糖、半乳糖、木糖和阿拉伯糖为主.以峰高定量,8种单糖的浓...     

A theoretical investigation on the structures and stabilities of C<Subscript>60</Subscript>X<Subscript>18</Subscript> and C<Subscript>70</Subscript>X<Subscript>10</Subscript> (X = H,F, Cl,and Br)

A density functional theory study was performed on fullerene derivatives C₆₀X₁₈ and C₇₀X₁₀ (X = H, F, Cl, and Br). The calculated results show that the lowest energy isomers are IPR-satisfying for C₆₀X₁₈ (X = H, F, Cl, and Br). It is found that the addition patterns of X (X = Cl and Br) are different from those of X (X = H and F) for C₆₀, demonstrating that the stability of fullerene derivatives is partly attributed to the steric repulsion and electronegativity of added atoms. However, the lowest energy isomers are IPR-violating for C₇₀X₁₀ (X = H, F, and Cl), suggesting that many more fullerene derivatives may violate the isolated pentagon rule.     

Synchronous high-performance liquid chromatography with a photodiode array detector and mass spectrometry for the determination of citrinin, monascin, ankaflavin, and the lactone and acid forms of monacolin K in red mold rice

The Monascus fermentation product red mold rice (RMR) has been found to contain the cholesterol-lowering agent monacolin K (MK) in both its lactone (MKL) and acid (MKA) forms and the mycotoxin citrinin (CT). The yellow pigments in RMR, namely, monascin (MS) and ankaflavin (AK), have been reported to exhibit antimetastatic and antiangiogenic activities. Currently, MK and these yellow pigments are usually detected in RMR by different analytical methods that are inconvenient, expensive, and time-consuming. The goal of this study was to establish a rapid, synchronous analytical method for determination of the MKA, MKL, MS, AK, and CT levels in RMR. MKA, MKL, MS, AK, and CT were extracted by the same extraction method, then separated by RP-HPLC with a C18 column. The effluent from the column was passed through a photodiode array detector and then introduced directly into a fluorescence detector. The results showed that high recovery rates of MKA, MKL, MS, AK, and CT are possible if RMR powder is extracted with 75% ethanol (10 mL) at 80 degrees C for 30 min. With regard to the optimal conditions of the HPLC, the peaks of MKA, MKL, MS, AK, and CT can be clearly separated from any noise peaks by isocratic elution with a mobile phase comprising 0.05% trifluoroacetic acid in acetonitrile-water (62.5 + 37.5, v/v).